User Guide

21 EP Series User Programming Guide
3. System Programming
Connect to the Controller
Open a web browser on a local computer and enter the IP address of the Controller (Default = 192.168.0.250).
The browser presents the login page as shown.
1. Enter the User ID.
• Default User ID = admin
2. Enter the Password.
• Default Password = admin
3. Click Login.
Just in case, a link is displayed to send a message to the EP Series
Super Administrator for a forgotten password.
NOTES:
» It is highly recommended to change the default password of the system.
» The Super Administrator password is set in Device Settings > Controller.