User Guide

EP Series User Programming Guide 36
Door
Door displays the doors that are assigned to the system. Click on the door name for additional information pertaining to each
door.
» NOTE: When programming various
elements of the system, do not use the
same name for multiple items (e.g., use
Door 1, Door 2, etc.).
» NOTE: Do not use special characters
(<>’?.”;!@#$%^&*()_-+={}:[]\|/).
Editing a Door
Select the desired door. Scroll to the
bottom of the page and click Edit.
After making any edits, be sure to click
Save at the bottom of the page.
Basic
1. Enter the desired Name and
Description (optional) for the door.
2. For multi-oor installations, select
the Floor.
Reader
1. In the Reader section, select the
settings for the door’s reader.
Door Contact
1. In the Door Contact section, check
the Enable checkbox if a door
contact is used.
2. Name the door contact and select
its type.
3. Adjust the Held Open Time, which
is the length of time the door can
be open following a valid access
request.
4. The ADA Open Time is an additional
time added to the Held Open Time.
Rex
1. Enter the Door Rex Name for the
door’s request to exit switch.
2. Select the type of Rex switch.
3. Check the Rex Activates Door Lock
checkbox to have the Rex activate
the door’s lock.