User Guide

45 EP Series User Programming Guide
Update
Update allows the user to update the rmware of the Controller.
Updating the Firmware
1. Select the location of the rmware
le. User PC, SD Card, or Update
Server.
2. Click Update.
» NOTE: This function only updates the
rmware of the Controller. To update the client rmware refer to Client Management.
» WARNING: Servers and Clients MUST be using the same rmware version!
» NOTE: Gateway and DNS IP addresses must be congured to access the update server. Refer to IP Address to congure these settings.
Web User Account
Create or edit the Web User Accounts that are used to log into to the Controller.
Adding or Editing a Web User
1. To add a new Web User, click New.
To edit an existing Web User, click
Edit.
2. Enter the User ID, Password and
Web User Name of the new user.
3. Assign a User Role, which denes
the privilege level of the user
account.
4. Enter the Language and Default
Page for the user.
5. Assign the Default Floor and enable
Floor Show if the oor graphic will
display to the user.
6. Enter the Auto Disconnect Time,
which is the amount of time, in
hours, before the Controller will
automatically log out the user.
7. Click Add or Save to save the
settings.