User Guide
49 EP Series User Programming Guide
FTP
File Transfer Protocol (FTP) enables and congures the system to backup to an FTP location. Enter FTP information as
provided by your web host.
Editing FTP Settings
1. Check the Enable checkbox to
enable an FTP server connection.
2. Enter the IP address of the FTP
server in the Server Address eld.
3. Enter the communications port
number into the Server Port eld.
4. Enter the FTP server user name
into the Server ID eld.
5. Enter the FTP server password into
the Server Password eld.
6. Check the Server Passive Mode
checkbox if required by the FTP
server.
7. Enter the upload directory path
used on the FTP server in the
Upload DIR eld.
8. Click Save to save the changes.