User Guide

63 EP Series User Programming Guide
Optional
Feature
Client Replacement
Client Replacement is used when an existing client Controller is replaced with a new client Controller.
Replace a Client
1. Power off bad Client board and
disconnect from network. At the
Dashboard the Door and Aux icons
are grayed out.
2. Install replacement Client board on
the network and set the IP to the
same address as the bad client.
3. Save the MAC address of the new
client.
» NOTE: Leave the Server address set to
0.0.0.0
4. On the Controller, go to Site
Management > Client Replacement.
Select the IP/MAC of the bad client
and click the Edit button.
5. Change the MAC address to the
replacement client
6. Login to the replacement client and
set the server IP and click Save.
7. After the replacement client
connects, the dashboard icons will
change from gray to color.