America’s radio controls, from the leader in wireless technology.
The MultiCode brand is synonymous with superior, ultra-reliable radio control, as evidenced by its preference among so many installers of gate operators and systems, garage door operators, and commercial access control systems, both for new construction and for the replacement market. Now, the same familiar, reliable RF controls you’ve been using are available from a dependable new source—Linear. The operative word is dependable.
Miniature Transmitters Gate Edge Transmitters Mini Transmitters: Model 3060 One-Channel, One-Button Transmitter Model 3083 Two-Channel, Two-Button Transmitter Micro Transmitter: Model 3070 One-Channel, One-Button Transmitter Model 3022 Wireless Safety Edge Transmitter • For use with safety edges on gates and large commercial doors • Can be used where hard wires are impractical • Easy to install and mount • More economical than coil/cord sets • Test/operate LED • Neutral case with fine grain finish • Mol
Receivers Model 1090 General Purpose Digital Receiver • Exclusive two-way lugs fit under terminal screws or accept push-on terminals in remote sites • 11-inch wire antenna supplied • Three tabs for universal operator mounting Specifications Power: for connection to any three-terminal 24 V operator (for higher voltages, consult factory); no need for separate transformer or adapter Frequency: 300 MHz (310 MHz also available) Codes: 1,024 (set by dip switches) Dimensions: 3 x 5.5 x 1.
