- Link Electronics Analog Audio to Digital Audio AES/EBU Specification Sheet

1660/083002
1020 REARCELL
DIGIFLEX 1660 ANALOG TO AES/EBU CONVERSION
SPECIFICATIONS
REFERENCE INPUT:
Number: ...................................................................... One
Interface: ..................................... AES3-1992 (Twisted-pair) or AES3-ID (BNC)
Format:........................................................ Bi-phase Mark Encoded
Impedance: ............................................................. 110Ω or 75Ω
Sampling Frequency Range: ............................................. 30KHz to 50KHz
Level: ...............................................................200mV Minimum
Connectors: .......................................................... BNC or Terminal
DIGITAL OUTPUTS:
Number: ................................................ One 75Ω or One 110Ω balanced
Interface: ...................................................... AES3-1992 or AES3-ID
Format:........................................................ Bi-phase Mark Encoded
Impedance: ............................................................. 110Ω or 75Ω
Level: ........................................ 1 volt p-p AES53-ID/3.2 Volts p-p AES3-1992
Connectors: ..................................................... Terminal Block or BNC
ANALOG TO DIGITAL CONVERSION:
Method: ............................................................ 2-bit, Delta-sigma
Resolution: ................................................. 24-BIT\20 BIT Jumper Select
Over-sampling Ratio: ............................................................ 128X
Modulator Order: .................................................................. 3
Default Sampling Rate: ......................................................... 48KHz
Optional Sampling Rate: ...................................................... 44.1KHz
ANALOG INPUTS:
Number: .................................................... One Stereo Pair, 2 Channel
Impedance: ............................................................ 10K Balanced
CMR: ........................................................................ 80dB
Configuration:............................................................... Balanced
Dynamic Range: .......................................................... >105 dBFS
Frequency Response: ............................................ ±0.1dB, 20Hz to 20KHz
Total Harmonic Distortion: ...................................................... <.004%
Total Harmonic Distortion+N:....................................................<.0.02%
Crosstalk: ...................................................... <-85dB, 20Hz to 20KHz
Separation: ...................................................... >90dB, 20Hz to 20KHz
INTERNAL ADJUSTMENTS:
Common Mode Rejection: ................................................. Resistive Trim
Attentuation Pad: .............................................. Resistive Gain Adjustment
Status DIP Switches: ............................................... Changes Status Data
MECHANICAL:
Height: ........................................................ 3.2"
Width:......................................................... 1.0"
Length: ....................................................... 10.0"
Weight:.......................................................8.0oz
Power: ................................................... 2.5 Watts
LINK ELECTRONICS, INC.
2137 Rust Avenue
Cape Girardeau, MO 63703-7668
Phone: [phone]
FAX: [phone]
PROFESSIONAL SERIES--
modular system products--by
LINK