Service Manual

1ST MATE KIT - MERCURY
Products of Mercury Marine
© MERCURY MARINE. All rights reserved. Reproduction in whole or in part without permission is prohibited.
Alpha, Axius, Bravo One, Bravo Two, Bravo Three, Circle M with Waves Logo, GO BOLDLY, K-planes, Mariner,
MerCathode, MerCruiser, Mercury, Mercury with Waves Logo, Mercury Marine, Mercury Precision Parts, Mercury
Propellers, Mercury Racing, MotorGuide, OptiMax, Pro XS, Quicksilver, SeaCore, Skyhook, SmartCraft, Sport-Jet,
Verado, VesselView, Zero Effort, Zeus, #1 On the Water and We're Driven to Win are registered trademarks of
Brunswick Corporation. Mercury Product Protection is a registered service mark of Brunswick Corporation. All
other marks are the property of their respective owners.
W6250 Pioneer Road
Fond du Lac, WI 54936-1939
Page 8 / 8 © 2019 Mercury Marine 90-8M0159024 eng DECEMBER 2019
DRAFT
COPY
Certifications and Compliance Hub
Radio ‑ hub US: FCC Part 15c EU: R&TTE, EN 300 328, Maritime/CE
EMC ‑ hub US: CISPR 16‑1 EU: EN 301 489‑01 (V1.9.2), Class A
Flammability ‑ fob IEC 60950 1&22, CE‑UL94
Imersion ‑ fob IEC 60945 IP68, Maritime/CE ‑ 3m / 10ft. water resistant
Compliant materials RoHS (2002/95/EC)
Compliant ABYC A‑33
ABYC A33 & E–11 Compliant. US Compliant (US Emergency engine/propulsion cut‑off devices standard)
DRAFT
COPY
DRAFT
COPY
DRAFT
COPY
DRAFT
COPY
DRAFT
COPY
For Products Sold in the US/CAN
Changes or modifications to the equipment not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may
not cause harmful interference, and (2) this device must accept any interference received, including interference that may
cause undesired operation.
Note:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
1st Mate Hub: This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. The
antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and
must not be co‑located or operating in conjunction with any other antenna or transmitter.
1st Mate Fob: This device has been tested and meets applicable limits for radio frequency (RF) exposure.
Déclaration d’exposition aux radiations: Déclaration d’exposition aux radiations: Cet équipement est conforme aux limites
d’exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé
avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps.
Radiation Exposure Statement: This equipment complies with IC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator & your
body.
This device complies with Industry Canada licence‑exempt RSS standard(s). Operation is subject to the following two
conditions:
• this device may not cause interference, and (2) this device must accept any interference, including interference that may
cause undesired operation of the device. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux
appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas
produire de brouillage,
• l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en
compromettre le fonctionnement.