Full Product Manual

ManualsBrandsLink2Home ManualsLandscape Flood Lights & SpotlightsSuper Bright Black 700-Lumen Motion Activated Outdoor Integrated LED 6500K Solar Powered Landscape Flood Light

Solar Motion Security LED Light

EM-SL700B

Introduction

We congratulate you on the purchase of yourLED Solar Sensor Light. You have chosen a high quality

product. Before using your LED Solar Sensor Light, please familiarize yourself with the instructions and

safety information below. Only use the product as described and for the specified applications.

This product is intended to illuminate outdoor areas for private use and is not suitable for commercial use

or for use in other applications.

Technical Data

Material: Aluminum + PC+ABS

LED Type: 10*3030

Battery: 7.4V, 1800mA (included)

Solar Panel 12V 300mA 3.5W, size 5.9*7.9in

Motion sensor angle: 140º

Detection range: approx. 26.2ft -39.4ft

Time setting: approx. 3seconds to 7min (+/-10%)

Lumen: 700LM (+/-10%)

Protection type: IP44 (splash-proof)

General safety instructions

1. Children should not be allowed to play with the product. Cleaning and user maintenance should not be

performed by children without adult supervision.

2. Never leave children unsupervised with the packaging material.The packaging material represents a

danger of suffocation.

3. Do not use this product if you notice any damage

4. The illuminants are not replaceable. If the illuminants fail, the entire product must be replaced

Function

The LED light will switch on during twilight or darkness when the motion detector

detects infrared radiation given off by people passing by.

User can turn the control knob TIME to adjust the duration of the illumination from approx. 3 seconds to 7

minutes (+/-10%).

User can turn the control knob LUX to adjust the daylight level at which to activate the motion detector.

Note: Once the light is activated by the motion detector, any subsequent detection will restart the timed

period again from the beginning.

Note: The motion detector responds to heat radiation. When outdoor temperatures are low, it is more

Summary of content (4 pages)

PAGE 1
Solar Motion Security LED Light EM-SL700B Introduction. We congratulate you on the purchase of yourLED Solar Sensor Light. You have chosen a high quality product. Before using your LED Solar Sensor Light, please familiarize yourself with the instructions and safety information below. Only use the product as described and for the specified applications. This product is intended to illuminate outdoor areas for private use and is not suitable for commercial use or for use in other applications.
PAGE 2
sensitive to body heat than when outdoor temperatures are warm. Note: If the light is not activating in nighttime, a street light, house light or other ambient light could be affecting activation. Turn the control knob LUX towards position to increase the daylight level. If the light is unnecessarily activating in daytime, turn the control LUX towards position to decrease the daylight level. Note: Regularly clean the motion detector to ensure proper functionality (refer to “Cleaning and Care“).
PAGE 3
6. After initial installation, the product needs about 2 days for charging under direct and opulent sunlight, before it can operate normally. Cleaning and Care Use a slightly dampened, lint-free cloth and mild cleaning agent toclean. Regularly check the motion detector for dirt.
PAGE 4
Disposal The packaging is made entirely of recyclable materials, which you may dispose of at local recycling facilities. To help protect the environment, please dispose of the product properly when it has reached the end of its useful life and not in the household waste. Information on collection points and their opening hours can be obtained from your local authority. Batteries may not be disposed of with the usual domestic waste.