Use and Care Manual

Pre-Installation

PLANNING INSTALLATION

Compare all parts in the package with the Hardware Included and Package Contents lists in this manual. If any part

is missing or damaged, do not install this wall mount system and call customer service at 1-877-527-0313.

PLANNING WALL PLACEMENT

CAUTION: Ensure the wall you select is a weight-bearing wall. Failure to observe this precaution can result in serious physical injury

and/or property damage. Consult a professional installer or contact customer service if you have any questions.

When selecting a wall to mount your tablet holder,

keep the following in mind:

□

Select a place with easy access to power outlets,

cable input sources, and connections for speakers and

accessories.

□

□ Select a weight-bearing wall. The wall must be able

to safely support four times the combined load of the

equipment and all attached hardware and components.

ENSURING WALL STABILITY

Carefully inspect the wall area you have selected. Examine the wall surface before you begin drilling.

WARNING: Do not drill near electrical wiring and water pipes.

□ For concrete walls, check for damaged or loose concrete and do not drill in those areas.

□ For brick wall, never drill into the mortar between blocks.

□ For wood studs, locate the wall studs and drill in the center of the stud.

TOOLS REQUIRED (NOT INCLUDED)

Power

drill

1/8 in. (3.5 mm)

wood drill bit or

1/4 in. (6 mm)

masonry drill bit

Phillips

screwdriver

Level Pencil

Stud

Tape measure

Safety

glasses

6.3”/160mm

128mm-224mm

5”-8.8”

1.7”/44mm

7.5”/190mm

4.7”/120mm

3.3”/85mm

2.4”/62mm

Toll Free 1.888.783.6082