Specification Sheet

AC01
Henry
DETAILS
Installation Type: AC01DI (Drop-In) or AC01UM (Undermount)
Glass Fiber Reinforced Concrete (Each sink is Hand Crafted; no two
sinks will be the same.)
No Overflow
AVAILABLE FINISHES
G
Gray
BLK
Black
AVAILABLE DRAINS
D004
Grid Strainer
AVAILABLE GRATES
GC001
Square Bars Grate (PS, SS, UB, BC)
GC002
Spoke Grate (PS, SS, UB, BC)
INSTALLATION
Drain should be installed first. A conversion kit for drain
installation is provided with each sink with 1.5” drain opening.
DROP-IN: Cut opening large enough for the sink to be “dropped
in” to countertop.
UNDERMOUNT: Cuts in countertop are up to the discretion of
the installer. Clips or other installation method must be provided
by the fabricator/installer.
Use 100% silicone to adhere sink to countertop. Clean any
excess silicone from sink surface.
CARE
Concrete sinks are crafted from glass fiber reinforced concrete
(GFRC). Linkasink hand-etches then seals each sink with a 7
Step impregnating sealer. Use Windex® with Vinegar for
cleaning as needed. The sink should not be exposed to harsh or
acidic chemicals, cleaners, or scrubbers.
WARRANTY
Linkasink warranties our product to be free from manufacturing
defect for the life of the product. Warranty does not cover abuse.
DIMENSIONS WILL VARY
DO NOT use this sheet as a guide for countertop cuts. Due to the handmade nature of each product, templates are not provided.
Contact: 1.866.395.8377 [e-mail]
Linkasink may make changes to specifications without notice.
Visit linkasink.com
for updated specification sheet.
5/1/2019
5.75”