Specification Sheet

6.25”
AC05
Oliver
DETAILS
Installation Type: AC05DI (Drop-In) or AC05UM (Undermount)
Glass Fiber Reinforced Concrete (Each sink is Hand Crafted; no two
sinks will be the same.)
No Overflow
AVAILABLE FINISHES
G
Gray
BLK
Black
AVAILABLE DRAINS
D004
Grid Strainer
AVAILABLE GRATES
GM001
Filigree Grate (PS, SS, UB, BC)
GM003
Spoke Grate (PS, SS, UB, BC)
GM007
Square Bars Grate (PS, SS, UB, BC)
INSTALLATION
Drain should be installed first. A conversion kit for drain installation
is provided with each sink with 1.5” drain opening. DROP-IN: Cut
opening large enough for the sink to be “dropped in” to countertop.
UNDERMOUNT: Cuts in countertop are up to the discretion of the
installer. Clips or other installation method must be provided by the
fabricator/installer.
Use 100% silicone to adhere sink to countertop. Clean any excess
silicone from sink surface.
CARE
Concrete sinks are crafted from glass fiber reinforced concrete
(GFRC). Linkasink hand-etches then seals each sink with a 7 Step
impregnating sealer. Use Windex® with Vinegar for cleaning as
needed. The sink should not be exposed to harsh or acidic
chemicals, cleaners or scrubbers.
WARRANTY
Linkasink warranties our product to be free from manufacturing
defect for the life of the product. Warranty does not cover abuse.
DIMENSIONS WILL VARY
DO NOT use this sheet as a guide for countertop cuts. Due to the handmade nature of each product, templates are not provided.
Contact: 1.866.395.8377 [e-mail]
Linkasink may make changes to specifications without notice.
Visit linkasink.com
for updated specification sheet.
5/1/2019