Quick Start Guide

2
Safety Information
Please read this important safety information carefully before using the FITT360. Follow the instructions
below to prevent injury to yourself or others and prevent damage to your device.
Product overheating
If you use a function that requires a lot of power for a long time, the product may heat up temporarily. If
the product comes into contact with skin for a long time, it may cause a low temperature burn resulting
in red spots or pigmentation. For your safety, please read the following description carefully and observe
the outlined precautions when using and handling the product.
∙ This product follows the minimum burn stimulus-quantity of the European temperature safety standard,
EN563(regulation temperature of the contact surface of the device). If the product surface temperature
exceeds 42 degrees, there is a risk of burns. If this happens, the product is designed to warn the user.
After an alarm, the product will shut down automatically.
∙ When the product gets hot, some functions may be limited or the product may be turned off
automatically. Please stop using the product until it cools down.
∙ Be sure to use the product on clothing only. If the product makes direct contact with skin, use it only in
an environment between 0°C and 30°C to prevent low temperature burns.
∙ If you feel hot while using the device, turn it off and immediately.
∙ Take off the device when the product gets hot. Prolonged exposure of your skin to an overheated
device may cause low temperature burn symptoms, such as red spots and pigmentation
∙ Children are more sensitive and weaker than adults, so please be careful not to use on children.
∙ Make sure your skin is covered when wearing the product to prevent low temperature burn symptoms.
In particular, please be careful when this product is used in high temperature environments or used by
those with poor blood circulation or a sensory impairment.
∙ Turn off the Bluetooth/ Wi-Fi function when not in use to prevent overheating.
∙ Do not use the product while charging; it may cause overheating.
∙ Do not place the product in a place where it may overheat, such as near a hot air balloon or fire.
Doing so may cause the product to heat up or catch fire.
∙ Do not cover the product with a cloth while it is in use or charging; it may cause overheating.
∙ Do not place the product where there is a possibility of overheating such as on an electric plate.
∙ Do not expose the unit to direct sunlight for a long time.
Waterproof Functionality