Smart Wake-Up Light User Manual
SAFETY INSTRUCTIONS To reduce the risk of fire, electric shock, or injury, please read these instructions before use. 1. This product is only intended for household use, including similar use in hotels. 2. Please place this product on a stable, level, and non-slippery surface. 3. Do not use this product in wet surroundings, such as in the bathroom, near a shower or a swimming pool. 4. Do not let the water run into the product or spill any water onto the product. 5.
PRODUCT OVERVIEW LED Light Snooze Alarm 2 Down Alarm 1 Time Setup/LED Display Mode UP FM Radio Bluetooth Speaker USB Output WiFi Adaptor Input FM Antenna Button Cell Compartment LED Display INSTALLATION &GETTING STARTED Connect the Wake-up Light to power with the Adapter provided.
lmportant: 1. This product has no power on/off button, and it will be on once you plug the power adapter into the socket. To disconnect power, unplug the power adapter. 2. Loosen the tie that wraps the FM Antenna, then unroll the wire for receiving strong signals when turning on the FM Radio. OPERATION GUIDE Note: The Wake-up Light will automatically save the current setting and exit from setting mode if the operation is not resumed within 15s. Time Before the first use, please set the time.
Step2:Press Step3:Press Setting. Step4:Press Volume Setting to change the Hour, then press to confirm and switch to Minute. to change the Minute, then press to confirm and switch to ringtone to select your favorite ringtone for Alarm 1, then press to confirm OFF: Ringtone off S-01 to S-07:Nature sounds F-08:The last FM station you were tuned to before turning off the radio. If you prefer another station, please turn on the FM radio to search and select the one you like, then set the alarm again.
FM Radio Step1: Press to ON/OFF Step2: Press and hold for 2 seconds,and wait for the wake-up light to automatically search FM stations.Available stations will be saved as P-01,P-O2, etc., in sequence. Step3: Press and hold to switch among the stations saved. Step4:Press to adjust the volume. U-01 to U-20: Volume levels Note: Please fully unwind the antenna and move it around until you receive the best reception.
F-08: The last FM station you were tuned to before turning off the radio. If you prefe another station, please turn on the FM radio to search and select the one you like, then set the alarm again. Step3:Press sound. to confirm your selection, then press to adjust the volume of the U-01 to U-20: Volume levels Step6: Press of the light.
CONNECT TO YOUR MOBILE DEVICE Step 1: Download Smart Life into your mobile device on App Store/Google Play, or scan the QR code below. Step 2: Create an account and log in.
Step 3:Connect the Device to Your Phone Please power on your wake-up light first, press and hold WiFi button for 15S the WiFi icon will flash quickly.
Step 3: Enable permissions for scanning devices, and tap Start scanning. Step 4: Tap Next after your wake-up light is found.
Step 5: Wait for connection. Step 6: Select your wifi and enter the correct password.
Step 7: Create a name for your wake-up light.
1. Ensure that Network Timing is ON.If it's off, the Repeat function of alarms is unavailable,and the alarm settings might not be accurate. 2. In this interface, you also can adjust Brightness of the LED Display. Q&A This part summarizes the most common problems you could encounter with the Wake-Up Light. lf you are unable to solve the problem with the information below, please feel free to contact xxx@xx.com for assistance.
Q1.The appliance does not work at all. * Perhaps the adapter is not inserted properly in the wall outlet.Plug the adapter properly in the wall outlet.* Perhaps there is a power failure.Check if the power supply works by connecting another appliance. Q2.What should l do when l cannot link the Wake-Up Light with the Smart Life App? * Check if the Wake-Up Light is powered on. * Make sure your mobile device is connected to the 2.4GHz WiFi Network.
-Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio / TV technician for help. RF Warning Statements: To maintain compliance with FCC’s RF exposure guidelines, this equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.
