Owners manual

System
H3 Datasheet(Revision1.2) Copyright© 2015 Allwinner Technology Co.,Ltd.All Rights Reserved. Page 180
0: Hold disable
1: Hold enable
9
R/W
0x0
GPL9_HOLD_OUTPUT.
Hold the output of GPIOL9 when system’s power is changing. The output
must be low level (0) or high level (1) or High-Z; any other outputs may not
hold on.
0: Hold disable
1: Hold enable
8
R/W
0x0
GPL8_HOLD_OUTPUT.
Hold the output of GPIOL8 when system’s power is changing. The output
must be low level (0) or high level (1) or High-Z; any other outputs may not
hold on.
0: Hold disable
1: Hold enable
7
R/W
0x0
GPL7_HOLD_OUTPUT.
Hold the output of GPIOL7 when system’s power is changing. The output
must be low level (0) or high level (1) or High-Z; any other outputs may not
hold on.
0: Hold disable
1: Hold enable
6
R/W
0x0
GPL6_HOLD_OUTPUT.
Hold the output of GPIOL6 when system’s power is changing. The output
must be low level (0) or high level (1) or High-Z; any other outputs may not
hold on.
0: Hold disable
1: Hold enable
5
R/W
0x0
GPL5_HOLD_OUTPUT.
Hold the output of GPIOL5 when system’s power is changing. The output
must be low level (0) or high level (1) or High-Z; any other outputs may not
hold on.
0: Hold disable
1: Hold enable
4
R/W
0x0
GPL4_HOLD_OUTPUT.
Hold the output of GPIOL4 when system’s power is changing. The outputs
must be low level (0) or high level (1) or High-Z; any other output may not
hold on.
0: Hold disable
1: Hold enable
3
R/W
0x0
GPL3_HOLD_OUTPUT.
Hold the output of GPIOL3 when system’s power is changing. The output
must be low level (0) or high level (1) or High-Z; any other outputs may not
hold on.
0: Hold disable
1: Hold enable
2
R/W
0x0
GPL2_HOLD_OUTPUT.
confidential