Owners manual

System
H3 Datasheet(Revision1.2) Copyright© 2015 Allwinner Technology Co.,Ltd.All Rights Reserved. Page 349
4.23.2.9. PL PULL Register 1 (Default Value: 0x00000000)
Offset: 0x20
Register Name: PL_PULL1
Bit
R/W
Default/Hex
Description
31:0
/
/
/
4.23.2.10. PL External Interrupt Configure Register 0 (Default Value: 0x00000000)
Offset: 0x200
Register Name: PL_EINT_CFG0
Bit
R/W
Default/Hex
Description
[4i+3:4i]
(i=0~7)
R/W
0
EINT_CFG
External INTn Mode (n = 0~7)
0x0: Positive Edge
0x1: Negative Edge
0x2: High Level
0x3: Low Level
0x4: Double Edge (Positive/ Negative)
Others: Reserved
4.23.2.11. PL External Interrupt Configure Register 1 (Default Value: 0x00000000)
Offset: 0x204
Register Name: PL_EINT_CFG1
Bit
R/W
Default/Hex
Description
31:20
/
/
/
[4i+3:4i]
(i=0~4)
R/W
0
EINT_CFG
External INTn Mode (n = 8~11)
0x0: Positive Edge
0x1: Negative Edge
0x2: High Level
0x3: Low Level
0x4: Double Edge (Positive/ Negative)
Others: Reserved
4.23.2.12. PL External Interrupt Configure Register 2 (Default Value: 0x00000000)
Offset: 0x208
Register Name: PL_EINT_CFG2
Bit
R/W
Default/Hex
Description
31:0
/
/
/
confidential