Owners manual

Display
H3 Datasheet(Revision1.2) Copyright© 2015 Allwinner Technology Co.,Ltd.All Rights Reserved. Page 433
TCON_GCTL_REG
0x000
TCON global control register
TCON_GINT0_REG
0x004
TCON global interrupt register0
TCON_GINT1_REG
0x008
TCON global interrupt register1
TCON1_CTL_REG
0x090
TCON1 control register
TCON1_BASIC0_REG
0x094
TCON1 basic timing register0
TCON1_BASIC1_REG
0x098
TCON1 basic timing register1
TCON1_BASIC2_REG
0x09C
TCON1 basic timing register2
TCON1_BASIC3_REG
0x0A0
TCON1 basic timing register3
TCON1_BASIC4_REG
0x0A4
TCON1 basic timing register4
TCON1_BASIC5_REG
0x0A8
TCON1 basic timing register5
TCON1_PS_SYNC_REG
0x0B0
TCON1 sync register
TCON1_IO_POL_REG
0x0F0
TCON1 IO polarity register
TCON1_IO_TRI_REG
0x0F4
TCON1 IO control register
TCON_ECC_FIFO_REG
0x0F8
TCON ECC FIFO register
TCON_CEU_CTL_REG
0x100
TCON CEU control register
TCON_CEU_COEF_MUL_REG
0x110+N*0x04
TCON CEU coefficient register0
(N=0,1,2,4,5,6,8,9,10)
TCON_CEU_COEF_ADD_REG
0x11C+N*0x10
TCON CEU coefficient register1
(N=0,1,2)
TCON_CEU_COEF_RANG_REG
0x140+N*0x04
TCON CEU coefficient register2
(N=0,1,2)
TCON_SAFE_PERIOD_REG
0x1F0
TCON safe period register
TCON1_FILL_CTL_REG
0x300
TCON1 fill data control register
TCON1_FILL_BEGIN_REG
0x304+N*0x0C
TCON1 fill data begin register
(N=0,1,2)
TCON1_FILL_END_REG
0x308+N*0x0C
TCON1 fill data end register
(N=0,1,2)
TCON1_FILL_DATA0_REG
0x30C+N*0x0C
TCON1 fill data value register
(N=0,1,2)
TCON1_GAMMA_TABLE_REG
0x400-0x7FF
TCON_ECC_FIFO_BIST_REG
0xFFC
7.2.7. LCD1 Module Register Description
7.2.7.1. TCON Global Control Register (Default Value: 0x00000000)
Offset: 0x0000
Register Name: TCON_GCTL_REG
Bit
R/W
Default/Hex
Description
31
R/W
0
TCON_En
0: disable
1: enable
When it’s disabled, the module will be reset to idle state.
confidential