Manual

HOW TO ACTIVATE YOUR IGO NAVIGATION LICENSE
***If you wish to activate the iGO Navigation you must contact your retailer and purchase the license***
Once you have purchased the license and have received the license file or link to the license file follow the steps bellow to activate.
Step One
Step Three
Step Two
Step Four
Step Five
Step Six
Step Seven
Step Eight
Step Nine
Step Ten
Once you have received the
license file, format a USB Drive
and copy the license file to the
USB.
Turn on the vehicle. Access
the File Manager by pressing
the File Manager icon on the
lower icon bar.
Go to the Home page in file
manager.
Select USB in the Home page.
**If you copied the entire license
folder.
Locate the license folder and
open it.
**If you copied the license file only
or
after opening the folder,
press and hold on the license
file and press copy
Once you have the file copied
back out to the Home page by
pressing the home icon in the
address bar.
Then select the System drive.
Once in the System drive
locate the sdcard folder and
open it.
Once in the Sdcard folder
locate the iGO folder and
open it.
Once in the iGO folder locate
the license folder and open it.
Once in the license folder
paste the copied file by
pressing the CLIPBOARD
icon on the upper right, then
select paste.
*Once you have pasted the file into the correct folder. Press Navigation and test the IGO System.
**If pressing Navigation icon opens a different Navigation application. Refer to user manual page 5 on how to
change the navigation icon app launch.