Quick Start Guide

LegalDisclaimers
Specifications are subject to change without notice. An active, customer-purchased Internet
Service Provider broadband account is required for connection of this router and other
connected computers and devices to the Internet. Some devices may require additional wireless
adapters or an Ethernet cable to connect to this router.
Maximum performance derived from IEEE Standard 802.11 specifications. An 802.11ax adapter
may be needed to achieve 11ax data rates. In order to achieve the best performance, router
must be used with a compatible AX4500 wireless device.
* Actual performance may vary, including lower wireless network capacity, data throughput rate,
range, and coverage. Performance depends upon many factors, conditions and variables,
including products used, interference, and other adverse conditions. The standard transmission
rates are the physical data rates. Actual data throughput may be lower and will depend on the
mix of wireless products used and external factors.
† Seamless Roaming is designed for devices that support the 802.11k standard. For information
on supported devices, please check with your device manufacturer. Seamless Roaming may
require the latest Max-Stream firmware. Please check the support page of your Max-Stream
router for more details. Also see * above.
Belkin, Linksys, Max-Stream, and many product names and logos are trademarks of the Belkin
group of companies. Third-party trademarks mentioned are the property of their respective
owners. Wi-Fi and Wi-Fi Protected Setup are either trademarks or registered trademarks of the
Wi-Fi Alliance. The Wi-Fi CERTIFIED Logo and the Wi-Fi Protected Setup Identifier Mark are
either trademarks or registered trademarks of the Wi-Fi Alliance.
© 2019 Belkin International, Inc. and/or its affiliates. All rights reserved.
Linksys
121 Theory, Irvine, CA 92617 USA
8820-02921 Rev. A00