Datasheet

Chapter 2

Network Setup and Extender Connections

Media Center Extender

Power on the Media Center Extender

NOTE: Power on your TV.

DMA2200

Plug the Media Center Extender’s power cord connector to the unit’s

power port on the back panel. Plug the cord into an electrical outlet.

DMA2200

FOR HOME OFFICE USE

Tested T

o Comply

With FCC S

tandards

SCART IN/OUT

RESET

Power Switch

DMA2200 Power Cord and Switch

There is also an on/off power switch just above the power port. Power on

the unit before starting Device Configuration.

DMA2100

This unit ships with the correct power clip for your region.

DMA2100

Reset /

Default

HDMI, the HDMI logo is a trademark or registered tradema

Teste

d To Comply

With FCC Stan

dards

Contains

FCC:N89-WM821-LS

FOR HOME OFFICE USE

DMA2100 Power Cord

Plug the Media Center Extender’s power cord connector to the unit’s

power port on the back panel. Plug the cord into an electrical outlet.

Regional Power adapters

If needed, pull out the clip covering the power port connector. You can

then snap in the appropriate power clip that matches your main power

outlet. Power clips are used in Europe and Asia.