User's Manual

ManualsBrandsLinksys ManualsUniversal RemoteDMRW1000

Navigating the User Interface

Controller/Wireless-N Touchscreen Remote

Wireless Home Audio

Now Playing

The Now Playing option brings up a screen that displays

information on the current track that is playing. Album

artwork, artist, song title, and time information is

displayed.

Settings

Play To

The Play To option allows you to configure which zones

are playing the music.

Network

Connect to Network

Select the connection method that will be used to connect

the Wireless Home Audio Director to the network.

Wired

Advanced This option is used for IP configuration. A

dynamic or static IP address can be selected here.

Dynamic IPs The dynamic IP option should be selected

if your router or network connection automatically

provides an IP address to devices on the network.

Once this option is selected, the Details screen can be

used to verify that an IP address has been obtained.

Static IPs Selecting Static IP will prompt you to enter

the IP address. To enter the IP address using the

remote control, remove the existing address by using

the left arrow on the Navigation Halo. Numbers can be

entered manually using the keypad or arrow up and

down on the Navigation Halo to scroll through the

number selections. To move to the next digit, use the

right arrow on the Navigation Halo. To enter a dot (.)

or period in the IP address, press the zero (0) button

twice.

Details This option displays the current network

connection settings including the wireless network name,

wireless security type, DHCP status, IP address, subnet

mask, gateway, and DNS information.

Wireless

Select Network Use this option to select a wireless

network name (also known as an SSID) from the list of

available networks or enter a wireless network name

manually by selecting Enter Network Name. To enter

the name manually, use the alphanumeric keypad on the

remote control to select the appropriate characters or use

the up and down arrows on the Navigation Halo to scroll

through the list of characters. To enter the next character,

use the right arrow on the Navigation Halo.