Quick Start Manual

2 Stereo Speaker Kit
Installation Overview English
Installation Overview
This Quick Installation Guide will guide you through connecting each
two-wire cable to a speaker at one end, and your audio amplifier at the
other end. For each channel (Left and Right), you will connect the red
coded input terminal on the speaker to the red coded output terminal of
the audio amplifier, and equivalently the black to the black.
Connecting the Speakers to the Director
To ensure proper operation and sound quality, the cables must be
connected to the speakers correctly. Do not allow any cable strands to
touch the other polarity or the rear panel of the amplifier. Make sure that
the speakers are connected to the correct Left and Right outputs.
NOTE: If the colors are not matching at both ends, the speakers
will play out-of-phase, resulting in the reduction of dynamics and
bass and the elimination of the position of the music or vocals in
between the two speakers.
NOTE: The speakers are interchangeable and can be used as either
the left or right speaker. The terminals and the cables are color
coded for correct polarity.