Quick Start Manual

3Stereo Speaker Kit
Connecting the SpeakersEnglish
Connecting the Speakers
Power off your Director (or other audio amplifier).A.
Locate the two-wire speaker cables provided. Each two-wire cable is B.
color coded with a red line on one of the wires, so it is easy to identify
at both ends.
C. Press down on the red coded
input terminal on the back
of the speaker and insert the
speaker wire with the red line.
D. Press down on the black coded
input terminal on the back
of the speaker and insert the
speaker wire without a marking.
E. Connect the other end of the
speaker wire with the red line
to the appropriate L (left) or
R (right) red coded output
terminal on the Director.
Connect the other end of the speaker wire without any marking to the F.
L (left) or R (right) black coded output that pairs up with the terminal
used in the previous step.
Repeat steps C-F to connect the other speaker. G.