Installation Instructions

Set IP Address and Disable DHCP
21. Click the Setup tab
22. In the Network Setup area, enter your assigned IP
address as the Local IP Address
23. Disable the DHCP server
24. Click Save Settings
Connect Router to Ethernet Jack
25. Remove the Ethernet cable from your computer and
plug it into the network jack in your wall. Leave the
cable plugged into port #1 of your router.
26. Do not plug anything into the “Internet” or “WAN” port of your router.
27. You should now be able to access the Augustana network wirelessly.
28. You can use the other LAN ports (2-4) for wired network devices.
This is where your assigned IP
Address goes: