User's Manual
INTERNET port
— Connect an Ethernet cable to this yellow gigabit (10/100/1000) port, and to a broadband Internet cable/DSL or fiber modem.
NOTE
For best performance, use CAT5E or higher rated cables on the Ethernet ports.
Wi-Fi Protected Setup™ button
— Press to configure wireless security on Wi-Fi Protected Setup-enabled network devices.
USB 2.0 port
— Connect and share USB drives on your network or on the Internet.
Reset button
— Press and hold for 10 seconds (until the power LED
starts flashing) to reset the router to factory settings. You can also restore the factory settings using Linksys Smart Wi-Fi on the Internet or mobile app.
Power port
— Connect the included AC power adapter.
Power switch
— Press to turn on the router (European only).
Top view