User's Manual
Table Of Contents
- Product Overview
- Setting Up: Basics
- How to create a home network
- Where to find more help
- How to install your router
- How to configure your router
- How to test your Internet connection speed
- How to connect devices to your network
- How to set up parental controls
- How to configure your guest network
- How to back up your router configuration
- How to customize Linksys Smart Wi-Fi
- Using an External Drive
- Setting Up: Advanced
- How to manually set up your router
- How to associate a router with your Linksys Smart Wi-Fi account
- How to get the most out of your dual-band router
- How to control access to your network
- How to set up the DHCP server on your router
- How to access your network on the Internet
- How to clone a MAC address
- How to connect to your corporate office using a VPN
- How to optimize your router for gaming and voice
- How to enable Voice over IP on your network
- How to configure UPnP
- How to use a router as an access point
- How to put your new router behind an existing router
- How to expose a device to the Internet
- Port Forwarding and Port Triggering
- Maintaining and Monitoring
- Troubleshooting
- Specifications
49
Maintaining and Monitoring
Linksys EA-Series
A confirmation screen opens.
5.
Click Ye s to confirm. All settings and logs are deleted, and your router is
returned to its factory default settings.
How to check the status of your router
Why would I want to check the status of my router? Your router status tells
you whether you have a secure Internet connection and informs you about the
status of your network-connected devices.
To check your router status:
1.
Log into Linksys Smart Wi-Fi. (See “How to connect to Linksys Smart Wi-
Fi” on page 7.
2.
Under Router Settings, click Troubleshooting.
3.
Click the Status tab. Detailed information about your router status is
displayed.
TIP
For field descriptions, click Help at the top of the screen.
4.
To view a list of connected network devices, click Devices. To view a full
report of your router status, click Report.
5.
Click OK to close the screen.