User Guide MAX-STREAM™ AC2200 MU-MIMO TRI-BAND ROUTER Model EA8300
Contents Product Overview .........................................................................................................3 Top view ............................................................................................................................................................. 3 System status indicator........................................................................................................................................ 4 Back view......................................
Product Overview Top view 3
System status indicator Ethernet cable connection to Internet port—When lit (orange), indicates a problem with the network cable connected to the Internet (WAN) port. Internet connection—When lit (orange), indicates the router cannot access the internet.
Back view USB 3.0 port (1)— Connect and share USB drives on your network or on the internet. USB activity indicator (2)— Lights indicate data transfer to/from external devices. Ethernet ports (3)—Connect ethernet cables to these blue gigabit (10/100/1000) ports, and to wired devices on your network. Note—For best performance, use CAT5e or higher rated cables on the Ethernet ports.
Side view Wi-Fi Protected Setup™ button—Press to connect to WPS-enabled network devices.
Setting Up: Basics Where to find more help In addition to this user guide, you can find help at these locations: • Linksys.com/support/EA8300 (documentation, downloads, FAQs, technical support, live chat, forums) • Linksys Smart Wi-Fi help (connect to Linksys Smart Wi-Fi, then click Help at the top of the screen) Note—Licenses and notices for third party software used in this product may be viewed on http://support.linksys.com/en-us/license. Please contact http://support.linksys.
How to install your router 1. To complete setup, you will need a computer to visit http://LinksysSmartWiFi.com in a web browser. 2. Identify your equipment. If you have a separate modem and standalone router, disconnect and remove your old router. If you have a modem router, leave it connected. 3. Position the antennas straight up and plug in the router to a power source. Make sure the power switch is in the | (on) position. 4. Connect your router to your modem or modem router.
At the end of setup, follow the on-screen instructions to set up your Linksys Smart Wi-Fi account. Use Linksys Smart Wi-Fi to configure your router from any computer with an internet connection. Manage your router’s settings: • Change your router’s name and password • Set up guest access • Configure parental controls • Connect devices to your Wi-Fi • Test your internet connection speed Note—As part of Linksys Smart Wi-Fi account setup, you will be sent a verification e-mail.
2.4 GHz Wi-Fi Name Wi-Fi Password 5 GHz1 Wi-Fi Name Wi-Fi Password 5 GHz2 Wi-Fi Name Wi-Fi Password Router Password 2.4 GHz Guest Wi-Fi Name 5GHz Guest Wi-Fi Name Guest Wi-Fi Password (Both share a password.
How to Use Linksys Smart Wi-Fi You can manage your router from anywhere in the world by using Linksys Smart Wi-Fi, but you can also do it directly from your home network. Linksys Smart Wi-Fi may be available for your mobile device, as well. See your device’s app store for information. How to connect to Linksys Smart Wi-Fi To connect to Linksys Smart Wi-Fi: 1. Open your computer’s web browser. 2. Go to http://LinksysSmartWiFi.com and log in to your account.
Network Map Lets you display and manage all network devices connected to your router. You can view devices on your main network and your guest network, or display information about each device. Guest Access Lets you set up and monitor a network for guests to access Wi-Fi without exposing personal information.
Parental Controls Lets you block web sites and set internet access times. Media Prioritization Lets you set which devices and applications have top priority for your network traffic.
Speed Test Lets you test your network’s internet connection speed. External Storage Lets you access an attached USB drive (not included) and set up file sharing, a media server, and FTP access.
Connectivity Lets you view and change basic and advanced network settings. Troubleshooting Lets you diagnose problems with your router and check the status of the network.
Wireless Lets you view and change your router’s wireless network. You can change network names, security mode, password, MAC filtering, and connect devices using Wi-Fi Protected Setup. Security Lets you view and change your router’s wireless security. You can set up the firewall, VPN settings, and make custom settings for applications and games.
Troubleshooting You can find more help from our award-winning customer support at linksys.com/support/EA8300. Your router was not successfully set up If Linksys Smart Wi-Fi did not complete the setup, you can try the following: • Press and hold the Reset button on your router with a paperclip or pin until the illuminated Linksys logo turns off and the blue MU-MIMO indicators start blinking (about 10 seconds). Install the router again.
Your Internet cable is not plugged in message If you get a “Your Internet cable is not plugged in” message when trying to set up your router, follow these troubleshooting steps. • Make sure that an ethernet or internet cable (or a cable like the one supplied with your router) is securely connected to the yellow Internet port on the back of the router and to the appropriate port on your modem. This port on the modem is usually labeled Ethernet.
If your internet service is cable, verify that the cable modem’s CABLE port is connected to the coaxial cable provided by your ISP. If your internet service is DSL, make sure that the DSL phone line is connected to the modem’s DSL port. • If your computer was previously connected to your modem with a USB cable, disconnect the USB cable. • Install the router again. Cannot access your router message To access your router, you must be connected to your own network.
2. Click your own network name. Click Connect. In the example below, the computer was connected to another wireless network named wraith_5GHz. The wireless network name of the Linksys EA8300 router, Damaged_Beez2.4 in this example, is shown selected. 3. If you are prompted to enter a network security key, type your password (security key) into the network security key field. Click OK. 4. Your computer will connect to the network, and you should be able to access the router.
3. Click the wireless network name of your Linksys EA8300 router (Damaged_Beez2.4 in the example). 4. Type your wireless network password (Security Key) into the Password field. Click OK. After setup The internet appears to be unavailable If the internet has difficulty communicating with your router, the problem may appear as a “Cannot find [internet address]” message in your web browser.
5. Click Yes. The router will reboot. While the router is rebooting, all connected devices will lose their internet connection, and will automatically reconnect when the router is ready again. Linksys Smart Wi-Fi does not open in your web browser The latest versions of Google ChromeTM, Firefox®, Safari® (for Mac® and iPad®), Microsoft Edge, and Internet Explorer® version 8 and newer work with Linksys Smart Wi-Fi.
Specifications Linksys EA8300 Model Name Max-Stream AC2200 MU-MIMO Tri-Band Router Model Number EA8300 Switch Port Speed 10/100/1000 Mbps (Gigabit Ethernet) Radio Frequency 2.4 GHz and 5 GHz (x2) # of Antennas 4 external adjustable antennas (non-detachable) Ports USB 3.
Notes: For regulatory, warranty, and safety information, see the CD that came with your router or go to Linksys.com/support/EA8300. Maximum performance derived from IEEE Standard 802.11 specifications. Actual performance can vary, including lower wireless network capacity, data throughput rate, range and coverage.
