Owner's Manual

EtherFast 10/100 Instant GigaDrive

Getting to Know the Instant GigaDrive

Rear Panel

(picture for model EFG20 only)

All of the GigaDrive’s connectors and switches are on the rear panel, as seen

below.

Power Switch The Power switch is a spring-loaded soft switch

which powers the GigaDrive on and off. If the

GigaDrive is not powered on, pressing the power

switch will initiate the GigaDrive’s start-up

process. Pressing the Power switch while the

GigaDrive is turned on will begin the GigaDrive’s

internal shut-down process. The Instant GigaDrive

must be powered off this way, or through its inter-

nal shutdown process.

Power Input The Power Input port is where the power adapter

plugs in. Never remove or cut off the power sup-

ply while the Instant Gigadrive is turned on.

Printer Port You can also add a printer to your network through

the Instant GigaDrive’s Printer port.

Linksys Instant EtherFast

Series

Instant Gigadrive Package Contents: 20 or 40 GBs

The following items should be included in the Instant GigaDrive packaging.

If any of these items are damaged or missing, please contact your Linksys

dealer for replacements.

• One Linksys EtherFast 10/100 Instant GigaDrive

• One AC Power Adapter and Power Cord

• One Driver CD-ROM, containing this User Guide and

GigaDrive Drivers for Windows 95, 98, NT 4.0, 2000, and Millennium

• One User Guide and Registration Card

• Four Gigadrive Stands

System Requirements

• Windows 95, 98, NT 4.0, 2000, or Millennium

• 10BaseT or 100BaseTX Ethernet network

• TCP/IP protocol enabled

DDiissccllaaiimmeerr

: Linksys highly recommends that you back up the

files on your Instant GigaDrive on a regular basis. In no

instance will Linksys be responsible for any data loss, nor will

Linksys perform any recovery on lost data or files.