Instant Gigabit Series EtherFast® 10/100/1000 8+1 Workgroup GigaSwitch Use this guide to install : EG0801W User Guide
COPYRIGHT & TRADEMARKS Copyright © 2001 Linksys, All Rights Reserved. EtherFast is a registered trademark of Linksys. Microsoft, Windows, and the Windows logo are registered trademarks of Microsoft Corporation. All other trademarks and brand names are the property of their respective proprietors. LIMITED WARRANTY Linksys guarantees that every EtherFast® 10/100/1000 8+1 Workgroup GigaSwitch is free from physical defects in material and workmanship under normal use for ONE year from the date of purchase.
Instant Gigabit Series Contents EtherFast® 10/100/1000 8+1 Workgroup GigaSwitch Introduction Introduction Your EtherFast®10/100/1000 8+1 Workgroup GigaSwitch Features Package Contents 1 1 1 2 Getting to Know the EtherFast® 10/100/1000 8+1 Workgroup GigaSwitch The 10/100/1000 Workgroup GigaSwitch’s Rear Panel The 10/100/1000 Workgroup GigaSwitch’s Front Panel 3 3 4 Planning Your Network Overview Switches Versus Hubs 5 5 5 Installing the EtherFast® 10/100/1000 8+1 Workgroup GigaSwitch onto Your Netw
Instant Gigabit Series Package Contents EtherFast® 10/100/1000 8+1 Workgroup GigaSwitch Getting to Know the EtherFast® 10/100/1000 Workgroup GigaSwitch The 10/100/1000 Workgroup GigaSwitch’s Rear Panel • • • • 2 One 10/100/1000 8+1 Workgroup Gigaswitch® One AC Power Adapter One Stacking/Wall Mounting Module One User Guide and Registration Card The Workgroup GigaSwitch’s Ports GigaSwitch The GigaSwitch port is used to connect to the PC into which you have installed an Instant Gigabit Network Adapter.
Instant Gigabit Series The LED Indicators The 10/100/1000 Workgroup GigaSwitch’s Front Panel EtherFast® 10/100/1000 8+1 Workgroup GigaSwitch Planning Your Network Overview Building a Gigabit network involves more topology rules in addition to the 10BaseT/100BaseT network rules. These rules specify distance limitations and cabling specifications. Data loss, collisions, and other network problems causing down time are likely to occur if the rules below are not followed. Power Amber.
Instant Gigabit Series nates the need to purchase new hardware, rewire and reconfigure an entire site all at once. This scalability factor ensures that Fast Ethernet will not fall obsolete to upgrades in speed standards and maintains use of all your old equipment until you decide to buy speedier replacements. Scalability allows you to budget for your networking needs over time. Now networks can run fast and slow segments at the same time for different users and departments.
Instant Gigabit Series EtherFast® 10/100/1000 8+1 Workgroup GigaSwitch Connecting Your Hardware Together and Booting Up Tips on on Switching Switching Your Your Network Network Tips Plug in the GigaSwitch's AC power adapter. The Power LED will light up. As devices make connections to the Switch’s ports, each port's corresponding Link/Act LED will light up. The remaining LEDs will also light up according to how your connection is made, e.g. full or half duplex, 10Mbps or 100Mbps.
Instant Gigabit Series Glossary 10BaseT - An Ethernet standard that uses twisted wire pairs. 100BaseTX - IEEE physical layer specification for 100 Mbps over two pairs of Category 5 UTP or STP wire. 1000BASE-T - provides half-duplex (CSMA/CD) and full-duplex 1000Mbps Ethernet service over Category 5 links as defined by ANSI/TIA/EIA-568-A. Topology rules for 1000BASE-T are the same as those used for 100BASE-TX. Category 5 link lengths are limited to 100 meters by the ANSI/TIA/EIA-568A cabling standard.
Instant Gigabit Series Unlike e-mail programs in which graphics and program files have to be "attached," FTP is designed to handle binary files directly and does not add the overhead of encoding and decoding the data. Full Duplex - The ability of a device or line to transmit data simultaneously in both directions. Half Duplex - Data transmission that can occur in two directions over a single line, but only one direction at a time.
Instant Gigabit Series EtherFast® 10/100/1000 8+1 Workgroup GigaSwitch Specifications Warranty Information Model Number Standards BE SURE TO HAVE YOUR PROOF OF PURCHASE AND A BARCODE FROM THE PRODUCT'S PACKAGING ON HAND WHEN CALLING. RETURN REQUESTS CANNOT BE PROCESSED WITHOUT PROOF OF PURCHASE. Protocol Ports Cabling Type Topology Speed Per Port LEDs EG0801W IEEE 802.3, IEEE 802.3ab, IEEE 802.3u, IEEE 802.
Instant Gigabit Series Contact Information For help with the installation or operation of this product, contact Linksys Customer Support at one of the phone numbers or Internet addresses below. Information Tech Support and RMA Issues Fax Email Web FTP Site 16 800-546-5797 (LINKSYS) 800-326-7114 949-261-1288 949-261-8868 support@linksys.com http://www.linksys.com ftp.linksys.
h t t p : / / w w w. l i n k s y s . c o m © Copyright 2001 Linksys, All Rights Reserved. Printed in the USA.