User's Manual Part 1

Chapter 5: Driver Installation for Windows XP

Windows XP Wireless Zero Configuration

Wireless-G PCI Adapter

Windows XP Wireless Zero Configuration

1. After installing the Adapter, the Windows XP Wireless Zero Configuration icon will appear in your computer’s

system tray. Double-click the icon.

2. The screen that appears will show any available wireless network. Select the network you want.

If this network has WEP encryption enabled, go to step 3.

If this network does not have WEP encryption enabled, you will be asked to select a network. Make sure the

box next to Allow me to connect to the selected wireless network, even though it is not secure is checked.

Then, click the Connect button, and go to step 4.

Figure 5-3: Windows XP Wireless Zero Configuration icon

NOTE: Windows XP has a built-in configuration tool.

Use Windows XP Wireless Zero Configuration (in the

system tray at the bottom of your screen) to configure

the Adapter.

NOTE: Steps 2 and 3 are the instructions and

screenshots for Windows XP with Service Pack 1

installed.

If you have not installed Service Pack 1, select the

network you want, and click the Connect button. If the

network has WEP encryption enabled, enter the WEP

key in the Network key field, and then click the

Connect button.

Figure 5-4: Network Connection - No WEP