User's Manual

61
Appendix I: Regulatory Information
Wireless-B Broadband Router
Caution: This equipment is intended to be used in all EU and EFTA countries. Outdoor use may be restricted to
certain frequencies and/or may require a license for operation. Contact local Authority for procedure to follow.
Note: Combinations of power levels and antennas resulting in a radiated power level of above 100 mW equivalent
isotropic radiated power (EIRP) are considered as not compliant with the above mentioned directive and are not
allowed for use within the European community and countries that have adopted the European R&TTE directive
1999/5/EC.
For more details on legal combinations of power levels and antennas, contact Linksys Corporate Compliance.
• Linksys vakuuttaa täten että Wireless-B Broadband Router tyyppinen laite on direktiivin 1999/5/EY oleellisten
vaatimusten ja sitä koskevien näiden direktiivien muiden ehtojen mukainen.
• Linksys Group déclare le Routeur d'accès sans fil-B est conforme aux conditions essentielles et aux
dispositions relatives à la directive 1999/5/EC.
• Belgique:
Dans le cas d'une utilisation privée, à l'extérieur d'un bâtiment, au-dessus d'un espace public, aucun
enregistrement n'est nécessaire pour une distance de moins de 300m. Pour une distance supérieure à 300m
un enregistrement auprès de l'IBPT est requise. Pour une utilisation publique à l'extérieur de bâtiments, une
licence de l'IBPT est requise. Pour les enregistrements et licences, veuillez contacter l'IBPT.
• France F:
2.4 GHz Bande : les canaux 10, 11, 12, 13 (2457, 2462, 2467, et 2472 MHz respectivement) sont
complétement libres d'utilisation en France (en utilisation intérieur). Pour ce qui est des autres canaux, ils
peuvent être soumis à autorisation selon le départment. L'utilisation en extérieur est soumis à autorisation
préalable et très restreint.
Vous pouvez contacter l'Autorité de Régulation des Télécommunications (http://www.art-telecom.fr) pour de
plus amples renseignements.
I
NDIN"Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must
a
ccept any interference, including interference that may cause undesired operation of the device."
"
This device has been designed to operate with an antenna having a maximum gain of [x] dB. Antenna having a higher gain is
s
trictly prohibited per regulations of Industry Canada. The required antenna impedance is [ y] ohms."
"To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent
"
Operation is subject to the
f
ollowing two conditions: (1) this
d
evice may not cause
i
nterference, and (2) this device
m
ust accept any interference,
i
ncluding interference that may
c
ause undesired operation of the
d
evice."
"
This device has been designed
t
o operate with an antenna having
a
maximum gain of [x] dB.
A
ntenna having a higher gain is
s
trictly prohibited per regulations
of Industry Canada. The required
"
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must
a
ccept any interference, including interference that may cause undesired operation of the device."
"
This device has been designed to operate with an antenna having a maximum gain of [x] dB. Antenna having a higher gain i
s
s
trictly prohibited per regulations of Industry Canada. The required antenna impedance is [ y] ohms."
"
To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent
i
sotropically radiated power (EIRP) is not more than that required for successful communication".
"
To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows
t
o provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing."
I
NDUSTRY CANADA (CANADA)