User Guide
Table Of Contents
- Chapter 1 - LAPN300
- Chapter 2 – Access Point Setup
- Administration
- User Level
- New Password
- Confirm New Password
- Automatically
- LAN
- Wireless
- Select SSID
- Primary Server
- Primary Server Port
- Primary Shared Secret
- Backup Server
- Backup Server Port
- Backup Shared Secret
- Captive Portal
- MAC Address
- IP Address
- User Name
- SSID Name
- Online Time
- Away Timeout
- Session Timeout
- Cluster
- System Status
- Maintenance
- Appendix A – Troubleshooting
- Appendix B – About Wireless LANs
- Appendix C – PC and Server Configuration
108
Internet Authentication Service (RADIUS) Setup
1.
Select Start > Programs > Administrative Tools > Internet Authentication Service.
2.
Right-click on Clients, and select New Client.
Figure 65: Service Screen
3.
Enter a name for the access point, click Next.
4.
Enter the address or name of the wireless access point, and set the shared secret, as entered
on the Security Settings of the wireless access point.
5.
Click Finish.
6.
Right-click on
Remote Access Policies
, select
New Remote Access Policy
.
7.
Assuming you are using EAP-TLS, name the policy ‘‘eap-tls’’, and click Next.