User Guide
Table Of Contents
- Chapter 1 - LAPN300
- Chapter 2 – Access Point Setup
- Administration
- User Level
- New Password
- Confirm New Password
- Automatically
- LAN
- Wireless
- Select SSID
- Primary Server
- Primary Server Port
- Primary Shared Secret
- Backup Server
- Backup Server Port
- Backup Shared Secret
- Captive Portal
- MAC Address
- IP Address
- User Name
- SSID Name
- Online Time
- Away Timeout
- Session Timeout
- Cluster
- System Status
- Maintenance
- Appendix A – Troubleshooting
- Appendix B – About Wireless LANs
- Appendix C – PC and Server Configuration
116
802.1x Authentication Setup
1.
Open the properties for the wireless connection, by selecting
Start > Control Panel > Network
Connections.
2.
Right-click on the
Wireless Network Connection
, and select
Properties
.
3.
Select the
Authentication
Tab, and ensure that
Enable network access control using IEEE
802.1X
is selected, and
Smart Card or other Certificate
is selected from the EAP type.
Figure 75: Authentication Tab