User Guide
Table Of Contents
- Chapter 1 - LAPN300
- Chapter 2 – Access Point Setup
- Administration
- User Level
- New Password
- Confirm New Password
- Automatically
- LAN
- Wireless
- Select SSID
- Primary Server
- Primary Server Port
- Primary Shared Secret
- Backup Server
- Backup Server Port
- Backup Shared Secret
- Captive Portal
- MAC Address
- IP Address
- User Name
- SSID Name
- Online Time
- Away Timeout
- Session Timeout
- Cluster
- System Status
- Maintenance
- Appendix A – Troubleshooting
- Appendix B – About Wireless LANs
- Appendix C – PC and Server Configuration
117
Encryption Settings
The encryption settings must match the access point’s on the wireless network you wish to join.
•
Windows XP will detect any available wireless networks, and allow you to configure each
network independently.
•
Your network administrator can advise you of the correct settings for each network. 802.1x
networks typically use EAP-TLS. This is a dynamic key system, so there is no need to enter key
values.
Enabling Encryption
To enable encryption for a wireless network, follow this procedure.
1.
Click on the
Wireless Networks
tab.
Figure 76: Wireless Networks Screen
2.
Select the wireless network from the
Available Networks
list, and click
Configure
.