User Guide
Table Of Contents
- Chapter 1 - LAPN300
- Chapter 2 – Access Point Setup
- Administration
- User Level
- New Password
- Confirm New Password
- Automatically
- LAN
- Wireless
- Select SSID
- Primary Server
- Primary Server Port
- Primary Shared Secret
- Backup Server
- Backup Server Port
- Backup Shared Secret
- Captive Portal
- MAC Address
- IP Address
- User Name
- SSID Name
- Online Time
- Away Timeout
- Session Timeout
- Cluster
- System Status
- Maintenance
- Appendix A – Troubleshooting
- Appendix B – About Wireless LANs
- Appendix C – PC and Server Configuration
27
802.1x Supplicant
802.1x
Supplicant
Enable if your network requires this access point to use 802.1X
authentication in order to operate.
Authentication This feature supports following two kinds of authentication:
• Authentication via MAC Address
Select this if you want to use MAC address for authentication.
The access point uses lowercase MAC address for Name and
Password, like xxxxxxxxxxxx.
• Authentication via Name and Password
Select this if you want to use name and password for
authentication.
Name - Enter the login name. The name includes 1 to 63 characters.
Special characters are allowed.
Password - Enter the desired login password. The password
includes 4 to 63 characters. Special characters are allowed.
Discovery Settings
Bonjour
Enable if administrator wants the access point to be discovered by Bonjour
enabled devices automatically. If VLAN is enabled, the discovery packets
will be sent out via management VLAN only. The access point supports http
and https services.
LLDP Enable if administrator wants the access point to be discovered by switch
by LLDP protocol. Information such as product name, device name,
firmware version, IP address, MAC address and so on will be advertised.
LLDP-MED Enable if administrator wants the access point to be discovered by switch
by LLDP-MED protocol. Information such as product name, device name,
firmware version, IP address, MAC address and so on will be advertised.