User Guide
Table Of Contents
- Chapter 1 - LAPN300
- Chapter 2 – Access Point Setup
- Administration
- User Level
- New Password
- Confirm New Password
- Automatically
- LAN
- Wireless
- Select SSID
- Primary Server
- Primary Server Port
- Primary Shared Secret
- Backup Server
- Backup Server Port
- Backup Shared Secret
- Captive Portal
- MAC Address
- IP Address
- User Name
- SSID Name
- Online Time
- Away Timeout
- Session Timeout
- Cluster
- System Status
- Maintenance
- Appendix A – Troubleshooting
- Appendix B – About Wireless LANs
- Appendix C – PC and Server Configuration
30
Wireless Channel Select wireless channel of the radio.
If Auto is selected, the access point will select the best available
channel when device boots up.
If you experience lost connections and/or slow data transfers
experiment with manually setting different channels to see which is the
best.
SSID Settings
SSID Name Enter the desired SSID Name. Each SSID must have a unique name.
The name includes 1 to 32 characters
Broadcast Enable or disable the broadcast of the SSID.
When the access point does not broadcast its SSID, the network name
is not shown in the list of available networks on a client station.
Instead, you must enter the exact network name manually into the
wireless connection utility on the client so that it can connect.
Isolation Enable or disable isolation among clients of the SSID. If enabled,
wireless clients cannot communicate with others in the same SSID.
Disabled by default.
VLAN ID Enter the VLAN ID of the SSID.
Used to tag packets which are received from the wireless clients of the
SSID and sent from Ethernet or WDS interfaces.
Applicable only when VLAN function is enabled. VLAN function can be
configured in Configuration LAN Network Setup screen.
Max Clients Enter the number of clients that can connect to the SSID. The range is
from 0 to 32, and 0 means no limit.