User Guide
Table Of Contents
- Chapter 1 - LAPN300
- Chapter 2 – Access Point Setup
- Administration
- User Level
- New Password
- Confirm New Password
- Automatically
- LAN
- Wireless
- Select SSID
- Primary Server
- Primary Server Port
- Primary Shared Secret
- Backup Server
- Backup Server Port
- Backup Shared Secret
- Captive Portal
- MAC Address
- IP Address
- User Name
- SSID Name
- Online Time
- Away Timeout
- Session Timeout
- Cluster
- System Status
- Maintenance
- Appendix A – Troubleshooting
- Appendix B – About Wireless LANs
- Appendix C – PC and Server Configuration
5
Chapter 1 - LAPN300
Package Contents
• Linksys Wireless Access Point
• Quick Start Guide
• Ethernet Cable
• AC Power Adapter
• CD with Documentation
• Mounting Bracket
• Mounting Kit
• Ceiling Mount Back Plate
• Drilling Layout Template
Physical Details
• LED—There is one LED for the device.
LED Color Activity Status
Green
Blinking System is booting.
Solid
System is normal; no wireless device
connected.
Blue
Blinking Software upgrade in process.
Solid
System is normal; at least one wireless
device connected.
Red Solid
Booting process or update failed; hard
reset or service required.
Ports and Button
• Power Port—Connect the AC power adapter to this port.
o NOTE: Use only the adapter that came with your access point.
• Ethernet Port—Connect a wired network device to this port. This port supports PoE (Power
over Ethernet) with a PoE switch or PoE injector. The maximum power consumption for
LAPN300 is 12.5 W. Make sure your PoE switch or PoE injector is 802.3af-capable or
802.3at-capable to provide sufficient power to access point.