User Guide
Table Of Contents
- Chapter 1 - LAPN300
- Chapter 2 – Access Point Setup
- Administration
- User Level
- New Password
- Confirm New Password
- Automatically
- LAN
- Wireless
- Select SSID
- Primary Server
- Primary Server Port
- Primary Shared Secret
- Backup Server
- Backup Server Port
- Backup Shared Secret
- Captive Portal
- MAC Address
- IP Address
- User Name
- SSID Name
- Online Time
- Away Timeout
- Session Timeout
- Cluster
- System Status
- Maintenance
- Appendix A – Troubleshooting
- Appendix B – About Wireless LANs
- Appendix C – PC and Server Configuration
57
Global Configuration Screen
Captive Portal Captive Portal is disabled by default.
Authentication
Timeout
The number of seconds the access point keeps an
authentication session open with a wireless client. If
the client fails to enter authentication credentials
within the timeout period, the client may need to
refresh the web authentication page.
The range is from 60 to 600 seconds. Default is 300.
Additional HTTP
Port
HTTP portal authentication uses the HTTP
management port by default. You can configure an
additional port for that process.
HTTP Port Define an additional por
t for HTTP protocol. The value
can be 80 or 1024 to 65535 and is 80 by default. If
Additional HTTP Port is enabled, the HTTP Port must
be different from the HTTP port in "Administration" ->
"Management Access" page.
Additional HTTPS
Port
HTTPS portal auth
entication uses the HTTPS
management port by default. You can configure an
additional port for that process.
HTTPS Port
Define an additional port for HTTPS protocol. The
value can be 443 or 1024 to 65535 and is 443 by
default. If Additional HTTPS Port is
enabled, the
HTTPS Port must be different from the HTTPS port in
"Administration" -> "Management Access" page.