User Guide
Table Of Contents
- Chapter 1 - LAPN300
- Chapter 2 – Access Point Setup
- Administration
- User Level
- New Password
- Confirm New Password
- Automatically
- LAN
- Wireless
- Select SSID
- Primary Server
- Primary Server Port
- Primary Shared Secret
- Backup Server
- Backup Server Port
- Backup Shared Secret
- Captive Portal
- MAC Address
- IP Address
- User Name
- SSID Name
- Online Time
- Away Timeout
- Session Timeout
- Cluster
- System Status
- Maintenance
- Appendix A – Troubleshooting
- Appendix B – About Wireless LANs
- Appendix C – PC and Server Configuration
75
System Status
System Summary
Provides the system status of the access point.
Figure 40: System Summary Screen
System Summary Screen
System Summary
Device SKU
The SKU is often used to identify device model number and region.
Firmware Version
The version of the firmware currently installed.
Firmware
Checksum
The checksum of the firmware running in the access point.
Local MAC
Address
The MAC (physical) address of the wireless access point.
Serial Number
The serial number of the device.
Host Name
The host name assigned to the access point.
System Up Time
How long the system has been running since the last restart or reboot.
System Time
The current date and time.
Power Source The power source of the access point. It can be Power over Ethernet
(PoE) or Power Adapter. When two power sources are plugged in, PoE
has higher precedence.
Buttons
Refresh
Click to update the data on the screen.