User Guide
Table Of Contents
- Chapter 1 - LAPN300
- Chapter 2 – Access Point Setup
- Administration
- User Level
- New Password
- Confirm New Password
- Automatically
- LAN
- Wireless
- Select SSID
- Primary Server
- Primary Server Port
- Primary Shared Secret
- Backup Server
- Backup Server Port
- Backup Shared Secret
- Captive Portal
- MAC Address
- IP Address
- User Name
- SSID Name
- Online Time
- Away Timeout
- Session Timeout
- Cluster
- System Status
- Maintenance
- Appendix A – Troubleshooting
- Appendix B – About Wireless LANs
- Appendix C – PC and Server Configuration
86
Configuration Backup/Restore Screen
Backup/Restore to/from Local PC
Backup
Configuration
Once you have the access point working properly, you
should back up the settings to a file on your computer.
You can later restore the access point's settings from
this file, if necessary.
To create a backup file of the current settings, click
Backup.
If you don't have your browser set up to save
downlo
aded files automatically, locate where you want
to save the file, rename it if you like, and click Save.
Restore
Configuration
To restore settings from a backup file:
1.
Click Browse.
2.
Locate and select the previously saved backup
file.
3.
Click Restore.
Backup/Restore to/from TFTP server
Backup
Configuration
To create a backup file of the current settings:
1.
Enter the destination file name you plan to save
in TFTP server.
2.
Enter the IPv4 address for the TFTP server.
3.
Click Backup.
Restore
Configuration
To restore settings from a backup file:
1.
Enter the source file name stored in TFTP server.
2.
Enter the IPv4 address for the TFTP server.
3.
Click Restore.