User Guide
Table Of Contents
- Chapter 1 - LAPN300
- Chapter 2 – Access Point Setup
- Administration
- User Level
- New Password
- Confirm New Password
- Automatically
- LAN
- Wireless
- Select SSID
- Primary Server
- Primary Server Port
- Primary Shared Secret
- Backup Server
- Backup Server Port
- Backup Shared Secret
- Captive Portal
- MAC Address
- IP Address
- User Name
- SSID Name
- Online Time
- Away Timeout
- Session Timeout
- Cluster
- System Status
- Maintenance
- Appendix A – Troubleshooting
- Appendix B – About Wireless LANs
- Appendix C – PC and Server Configuration
87
Factory Default
It’s highly recommended you save your current configuration file before you restore to factory default
settings. To save your current configuration file, click Maintenance > Configuration Backup/Restore.
Select
Yes
and click Save.
Figure 48: Factory Default Screen
Factory Default Screen
Factory Default
To restore your access point to its
factory defaults,
select an option and click Save.
•
Reset Parameters that can share with
Slaves ONLY
When current AP is a master of a cluster,
select this option to restore all sharable
parameters of current AP and its slaves to
factory defaults. Cluster settings and non-
sharable parameters will not reset.
•
Reset All Parameters to Factory Default
•
No. Don’t restore to factory defaults.