User Guide

ManualsBrandsLinksys ManualsNetworkingLAPN300

Table Of Contents

Chapter 1 - LAPN300
- Mounting Guide
  - Wall Installation
  - Ceiling Installation
Chapter 2 – Access Point Setup
- Overview
- Set up using a web browser
- Setup wizard
Administration
- User accounts
- Time
- Log settings
- Management access
- SSL certificate
- LED
User Level
New Password
Confirm New Password
Automatically
LAN
- Network setup
- Advanced
Wireless
- Basic Settings
- Security
  - Security Mode
- Rogue AP Detection
- Scheduler
- Scheduler Association
- Connection Control
- Rate Limit
- Quality of Service (QoS)
- WDS
- Workgroup Bridge
- Advanced Settings
Select SSID
Primary Server
Primary Server Port
Primary Shared Secret
Backup Server
Backup Server Port
Backup Shared Secret
Captive Portal
- Global Configuration
- Portal Profiles
- Local User
- Local Group
- Web Customization
- Profile Association
- Client Information
MAC Address
IP Address
User Name
SSID Name
Online Time
Away Timeout
Session Timeout
Cluster
- Settings & Status
  - Master
- Client Sessions
- Channel Management
System Status
- System Summary
- LAN Status
- Wireless Status
- Wireless Clients
- Statistics
- Log View
Maintenance
- Firmware Upgrade
- Configuration Backup/Restore
- Factory Default
- Reboot
- Ping Test
- Packet Capture
- Diagnostic Log
Appendix A – Troubleshooting
- Overview
- General Problems
Appendix B – About Wireless LANs
- Overview
- Wireless LAN Terminology
Appendix C – PC and Server Configuration
- Overview
- Using WEP
- Using WPA2-PSK
- Using WPA2-Enterprise
  - Wireless Station Configuration
  - RADIUS Server Configuration
- 802.1x Server Setup (Windows 2000 Server)
- 802.1x Client Setup on Windows XP
- Using 802.1x Mode (without WPA)

Reboot

Reboot power cycles the device. The current configuration file will remain after reboot.

Figure 49: Reboot Screen

Reboot Screen

Device Reboot Select

Yes

and click

Save to power cycle the access

point.