User Guide
Table Of Contents
- Chapter 1 - LAPN300
- Chapter 2 – Access Point Setup
- Administration
- User Level
- New Password
- Confirm New Password
- Automatically
- LAN
- Wireless
- Select SSID
- Primary Server
- Primary Server Port
- Primary Shared Secret
- Backup Server
- Backup Server Port
- Backup Shared Secret
- Captive Portal
- MAC Address
- IP Address
- User Name
- SSID Name
- Online Time
- Away Timeout
- Session Timeout
- Cluster
- System Status
- Maintenance
- Appendix A – Troubleshooting
- Appendix B – About Wireless LANs
- Appendix C – PC and Server Configuration
9
3.
Type in default username: admin, and password: admin.
4.
Click Login to launch the browser-based setup and follow the on-screen instructions.
Figure 1: Password Dialog
If you can't connect—It is likely that your PC’s IP address is incompatible with the wireless access
point’s IP address. This can happen if your LAN does not have a DHCP Server. If there is no DHCP server
in your network, the access point will fall back to its default IP address: 192.168.1.252, with a network
mask of 255.255.255.0.
OR
If your PC’s IP address is not compatible with this, you must change your PC’s IP address to an unused
value in the range 192.168.1.1 ~ 192.168.1.254, with a network mask of 255.255.255.0. See
Appendix A - Windows TCP/IP for details for this procedure.