User Guide
Table Of Contents
- Chapter 1 - LAPN300
- Chapter 2 – Access Point Setup
- Administration
- User Level
- New Password
- Confirm New Password
- Automatically
- LAN
- Wireless
- Select SSID
- Primary Server
- Primary Server Port
- Primary Shared Secret
- Backup Server
- Backup Server Port
- Backup Shared Secret
- Captive Portal
- MAC Address
- IP Address
- User Name
- SSID Name
- Online Time
- Away Timeout
- Session Timeout
- Cluster
- System Status
- Maintenance
- Appendix A – Troubleshooting
- Appendix B – About Wireless LANs
- Appendix C – PC and Server Configuration
97
802.1x
This uses the 802.1X standard for client authentication, and WEP for data encryption. If possible, you
should use WPA-Enterprise instead, because WPA encryption is much stronger than WEP encryption.
If this option is used:
•
The access point must have a "client login" on the RADIUS server.
•
Each user must have a "user login" on the RADIUS server.
•
Each user's wireless client must support 802.1X and provide the login data when required.
All data transmission is encrypted using the WEP standard. You only have to select the WEP key size;
the WEP key is automatically generated.