User Guide
Table Of Contents
- Chapter 1 – Getting Started
- Chapter 2 – System Status
- Chapter 3 – Quick Start
- Chapter 4 – System Management
- Chapter 5 – Port Management
- Chapter 6 – VLAN Management
- Chapter 7 - Spanning Tree Management
- Chapter 8 - MAC Address Management
- Chapter 9 – Multicast
- Chapter 10 - IP Interface
- Chapter 11 - IP Network Operations
- Chapter 12 – Security
- Chapter 13 - Access Control List
- Chapter 14 - Quality of Service
- Chapter 15 - Maintenance
- Chapter - 16 Support
101
MSTP Instance Status
The MSTP Instance Status page displays parameters of MST instances. This is the per-instance
equivalent to the Spanning Tree page.
To view MSTP instance settings:
Click
Configuration > Spanning Tree Management > MSTP Instance Status
.
•
Instance ID—Select an MST instance to be displayed and defined.
•
Bridge Priority—Set the priority of this bridge for the selected MST instance.
•
Designated Root Bridge ID—Displays the priority and MAC address of the Root Bridge for
the MST instance.
•
Root Port—Displays the root port of the selected instance.
•
Root Path Cost—Displays the root path cost of the selected instance.
•
Bridge ID—Displays the bridge priority and the MAC address of this device for the
selected instance.
•
Remaining Hops—Displays the number of hops remaining to the next destination.