User Guide
Table Of Contents
- Chapter 1 – Getting Started
- Chapter 2 – System Status
- Chapter 3 – Quick Start
- Chapter 4 – System Management
- Chapter 5 – Port Management
- Chapter 6 – VLAN Management
- Chapter 7 - Spanning Tree Management
- Chapter 8 - MAC Address Management
- Chapter 9 – Multicast
- Chapter 10 - IP Interface
- Chapter 11 - IP Network Operations
- Chapter 12 – Security
- Chapter 13 - Access Control List
- Chapter 14 - Quality of Service
- Chapter 15 - Maintenance
- Chapter - 16 Support
114
•
Querier Source IP Address-Select the source IP address of the IGMP Querier. The
following options are available:
o
Auto-The system decides whether to use the IP address of the VLAN or the
management IP address.
o
User Defined-This can be the IP address of the VLAN or it can be the
management IP address.
5.
Click Apply. The Running Configuration file is updated.
MLD Snooping
To enable MLD Snooping and configure it on a VLAN:
1.
Click
Configuration > Multicast > MLD Snooping
.
When MLD Snooping is globally enabled, the device monitoring network traffic can
determine which hosts have requested to receive Multicast traffic. The device performs
MLD Snooping only if both MLD snooping and Bridge Multicast filtering are enabled.
2.
Enable MLD Snooping.
3.
Choose a VLAN ID.
4.
Click Edit.
5.
Enable or disable the following features for the selected VLAN:
•
VLAN ID—Select a VLAN on which to configure MLD Snooping.
•
MLD Snooping Status—Select to enable MLD snooping globally on all interfaces.
•
Auto-Learn MRouter Ports—Select to enable Auto Learn of the Multicast router.