User Guide
Table Of Contents
- Chapter 1 – Getting Started
- Chapter 2 – System Status
- Chapter 3 – Quick Start
- Chapter 4 – System Management
- Chapter 5 – Port Management
- Chapter 6 – VLAN Management
- Chapter 7 - Spanning Tree Management
- Chapter 8 - MAC Address Management
- Chapter 9 – Multicast
- Chapter 10 - IP Interface
- Chapter 11 - IP Network Operations
- Chapter 12 – Security
- Chapter 13 - Access Control List
- Chapter 14 - Quality of Service
- Chapter 15 - Maintenance
- Chapter - 16 Support
139
DHCP Interfaces
In Layer 2, DHCP Snooping can only be enabled on VLANs with IP addresses.
To enable DHCP Snooping on specific interfaces:
1.
Click
Configuration > IP Network Operations > DHCP > DHCP Interfaces
.
2.
The following fields are displayed for each interface for which the DHCP Snooping is
enabled:
•
Interface—On which DHCP Snooping is enabled or disabled.
•
Interface IP Address—IP address of the interface on which DHCP Snooping is
enabled.
•
DHCP Snooping—Select to enable DHCP snooping.
3.
To enable DHCP Snooping on an interface, click Add.
4.
Select the interface and the feature to be enabled: DHCP Snooping.
5.
Click Apply. The settings are written to the Running Configuration file.