User Guide
Table Of Contents
- Chapter 1 – Getting Started
- Chapter 2 – System Status
- Chapter 3 – Quick Start
- Chapter 4 – System Management
- Chapter 5 – Port Management
- Chapter 6 – VLAN Management
- Chapter 7 - Spanning Tree Management
- Chapter 8 - MAC Address Management
- Chapter 9 – Multicast
- Chapter 10 - IP Interface
- Chapter 11 - IP Network Operations
- Chapter 12 – Security
- Chapter 13 - Access Control List
- Chapter 14 - Quality of Service
- Chapter 15 - Maintenance
- Chapter - 16 Support
144
To add a new user:
1.
Click
Configuration > Security > Management Security > User Access & Accounts
.
2.
Enter the following fields:
•
HTTP Service—Select to enable on the device.
•
HTTP Server Port—Enter the port on which HTTP is enabled.
•
HTTPS Service—Select to enable on the device.
•
HTTPS Server Port—Enter the port on which HTTPS is enabled.
•
Telnet—Select to enable on the device.
3.
Click Add to add a new user or click Edit to modify a user.
4.
Enter the parameters.
•
User Name—Enter a new username between 0 and 20 characters. UTF-8
characters are not permitted.
•
Password—Enter a password (UTF-8 characters are not permitted).
•
Confirm Password—Enter the password again.
5.
Click Apply. The user is added to the Running Configuration file of the device.
Access Authentication
You can assign authentication methods to the various management access methods, such as
console, HTTP, and HTTPS. The authentication can be performed locally or on a RADIUS server.