User Guide
Table Of Contents
- Chapter 1 – Getting Started
- Chapter 2 – System Status
- Chapter 3 – Quick Start
- Chapter 4 – System Management
- Chapter 5 – Port Management
- Chapter 6 – VLAN Management
- Chapter 7 - Spanning Tree Management
- Chapter 8 - MAC Address Management
- Chapter 9 – Multicast
- Chapter 10 - IP Interface
- Chapter 11 - IP Network Operations
- Chapter 12 – Security
- Chapter 13 - Access Control List
- Chapter 14 - Quality of Service
- Chapter 15 - Maintenance
- Chapter - 16 Support
170
MAC-based ACLs are defined in the MAC Based ACL page. The rules are defined in the MAC-
Based ACE page.
To define a MAC-based ACL:
1.
Click
Configuration > Access Control List > MAC Based ACL
.
This page contains a list of all currently-defined MAC-based ACLs.
2.
Click Add.
3.
Enter the name of the new ACL in the ACL Name field. ACL names are case-sensitive.
4.
Click Apply. The MAC-based ACL is saved to the Running Configuration file.
MAC-Based ACE
To add rules (ACEs) to an ACL:
1.
Click
Configuration > Access Control List > MAC-based ACE
.
2.
Select an ACL, and click Search. The ACEs in the ACL are listed.
3.
Click Add.
4.
Enter the parameters.
•
ACL Name—Select the name of the ACL to which an ACE is being added.
•
ACE Priority—Enter the priority of the ACE. ACEs with higher priority are
processed first. One is the highest priority.
•
Action on Matched Packets—Select the action taken upon a match.
•
The options:
o
Permit—Forward packets that meet the ACE criteria.
o
Deny—Drop packets that meet the ACE criteria.
o
Shutdown—Drop packets that meet the ACE criteria, and disable the port
from where the packets were received. Such ports can be reactivated from
the Port Settings page.