User Guide
Table Of Contents
- Chapter 1 – Getting Started
- Chapter 2 – System Status
- Chapter 3 – Quick Start
- Chapter 4 – System Management
- Chapter 5 – Port Management
- Chapter 6 – VLAN Management
- Chapter 7 - Spanning Tree Management
- Chapter 8 - MAC Address Management
- Chapter 9 – Multicast
- Chapter 10 - IP Interface
- Chapter 11 - IP Network Operations
- Chapter 12 – Security
- Chapter 13 - Access Control List
- Chapter 14 - Quality of Service
- Chapter 15 - Maintenance
- Chapter - 16 Support
20
Chapter 4 – System Management
System Information
To enter system information:
1.
Click
Configuration > System Management > System Information
.
2.
View or modify the system settings.
•
System Description—Displays a description of the device.
•
System Location—Enter the location where the device is physically located.
•
System Contact—Enter the name of a contact person.
•
System Host Name—Select the host name of this device.
o
Default—The default host name (System Name) of these switches is
switch123456, where 123456 represents the last three bytes of the
device MAC address in hex format.
o
User Defined—Enter the host name. Use only letters, digits, and hyphens.
Host names cannot begin or end with a hyphen. No other symbols,
punctuation characters, or blank spaces are permitted (as specified in
RFC1033, 1034, 1035).
3.
Click Apply to save the values in the Running Configuration file.